How much chlorine does a 25-meter pool use per week?

It depends on the pool's volume, sun, swimmers and the chlorine you use. As a worked example, a 25 × 12.5 m pool averaging 1.4 m deep holds about 440 m³. Losing 2 ppm a day, it needs roughly 7 kg of TICA 90 or 9 kg of calcium hypochlorite 70 per week. Test the water to know yours.

No two pools use the same amount of chlorine, even at the same size. But the arithmetic is simple, and if you keep the water within the rules, you won’t have problems.

Start with the rules

The Department of Health’s rules for public swimming pools, under the Code on Sanitation (PD 856), call for:

  • Chlorine residual: 0.5 to 1.0 ppm while the pool is in use.
  • pH: 7.4 to 7.8 at all times during use.
  • Records: water test results kept for six months.

Those numbers only mean something if someone actually tests the water.

The worked example

1. Find the volume. Length × width × average depth. 25 m × 12.5 m × 1.4 m ≈ 440 m³. Use your own pool’s numbers.

2. Know what 1 ppm means. In water, 1 ppm is 1 gram per cubic meter. Raising 440 m³ by 1 ppm takes about 440 g of available chlorine:

Product Available chlorine To raise 440 m³ by 1 ppm
TICA 90 (TCCA) about 90% about 490 g
Calcium hypochlorite 70 about 70% about 630 g

3. Estimate the daily loss. Sun, heat, rain and swimmers burn chlorine off. An outdoor pool in the Philippines can easily lose 1 to 3 ppm a day, more on a crowded, sunny weekend. Your own test results tell you your number.

4. Multiply by seven.

Daily loss TICA 90 per week Cal hypo 70 per week
1 ppm about 3.5 kg about 4.5 kg
2 ppm about 7 kg about 9 kg
3 ppm about 10 kg about 13 kg

These are starting points to check against your tests, not a dosing schedule.

The catch with TICA: cyanuric acid

TICA 90 adds cyanuric acid along with its chlorine, about 0.6 ppm for every 1 ppm of chlorine. At 2 ppm a day, that’s roughly 8 ppm of cyanuric acid a week, and it stays until water is replaced. Some is good: it shields chlorine from the sun. Too much makes chlorine sluggish. The US CDC’s Model Aquatic Health Code caps it at 90 ppm. Test for it monthly and replace part of the water, or switch to cal hypo for a while, when it climbs. See tablets or granules.

Don’t run a pool by its color

Some pool services judge the water by how green or blue it looks and dose by feel, without testing chlorine or pH. Clear water can still be unsafe, and the eye can’t see pH.

The people who pay for that are the swimmers. Picture a child coming out of the pool with red eyes and itchy skin. That sting, and the strong “chlorine” smell, usually come from chloramines, which form when there’s too little free chlorine for the number of swimmers, often with the pH off. It means the pool needs proper testing and dosing, not just more of the same.

So test chlorine and pH every day the pool is open, with a proper test kit, and write the results down.

Choose who runs your pool carefully

If you manage a hotel, resort, condo or subdivision pool, ask whoever services it:

  • Do they test? Daily chlorine and pH, at least, with written records.
  • Are they trained? Pool operation is a skill. A recognized pool operator course is worth the time, for your own staff or for the service you hire.
  • Do they know their chemicals? Including which ones must never be mixed.

A pool is a public-health job. Be responsible with it.

Want a number for your pool?

Send me your pool’s size, average depth, whether it’s indoor or outdoor, and how busy it gets. I’ll work out a starting estimate with you.

Chemicals in this answer

Still not sure?Ask Mark